Kingston DC600M 960 GB Solid State Drive – 2.5″ Internal – SATA [SATA/600] – Mixed Use (sedc600m-960g)

Description

This item is brand-new, factory sealed.

Designed for Data Center Environments
On-board Power Loss Protection (PLP)
Consistent latency and IOPS, reliable QoS
Up to 560MB/s Read, 530MB/s Write
Part Number: SEDC600M/960GForm factor
2.5 Inch
Interface
SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s)
Capacities
¹960GB
NAND
3D TLC
Sequential Read/Write
960GB – 560MBs/530MBs
Steady State 4k Random Read/Write
960GB – 94,000/65,000 IOPS
Quality of Service (Latency)³,⁴,⁵(99.999)
Read/Write
960GB – 200/300 uSec
Typical Latency – Read/Write
<200 s /<30 us³,⁴,⁵
Hot-Plug Capable
Static and Dynamic Wear Leveling
Enterprise SMART tools
Reliability tracking, usage statistics, life remaining, wear leveling, temperature
Hardware-based Power Loss Protection Endurance
960GB – 1752TBW⁶, 1 DWPD (5 years)⁷, 1.66 DWPD (3 years)⁷
Power Consumption
Idle: 1.30W
Average: 1.45W
Max Read: 1.6W
Max Write: 3.6W
Storage temperature
-40^oC – 85^oC
Operating temperature
0^oC – 70^oC
Vibration operating
2.17G Peak (7-800Hz)
Vibration non-operating
20G Peak (10-2000Hz)
MTBF
2 million hours
UBER
Note:
1.Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingstons Flash Memory Guide.
2. Quality of Service (QoS) of an SSD refers to the consistency and predictability of Latency (response time) and IOPS (IOs Per Second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSDs latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
3. Measurement taken once the workload has reached steady state but including all background activities required for normal operation and data reliability.
4. Based on 1920GB capacity.
5. Workload based on FIO, Random Aligned 4KB QD1 workload. Quality of Service is measured as the time taken for 99.999 percentile of commands to finish the round-trip from host to drive and to host. Typical Latency is measured as the time taken for 99.9 percentile of commands to finish the round-trip from host to drive and to host.
6. Total Bytes Written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
7. Drives Writes Per Day (DWPD).Item Dimension (L inchxW inchxH inch)
4 x 3 x 1
Weight
1 lb
Warranty Information
5 Years

Features

Environmentally Friendly:
Yes
Device Supported:
Server
Environmental Compliance:
Waste Electrical and Electronic Equipment Directive (WEEE)