Description
This item is brand-new, factory sealed.
The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy (MULE) features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula. Paint Sub-Category: Epoxy; Intended Application Environment: Interior/Exterior; Finish/Sheen: Gloss; Color(s): Safety Yellow.
Global Product Type:Building/Construction Paints & Primers
Paint Sub-Category:Epoxy
Paint Sub-Category:Water-Based
Intended Application Environment:Interior/Exterior
Finish/Sheen:Gloss
Color(s):Safety Yellow
Color Family:Yellow
Number of Colors:1
Volume Capacity:1 gal
Packaging Type:Bucket/Pail
Binder/Vehicle Ingredient(s):Modified Urethane Latex Epoxy
Diluent/Solvent Ingredient(s):Glycol Ether
Diluent/Solvent Ingredient(s):Water
Application Method:Brush
Application Method:Roller
Application Temperature Range:50 to 90 F
Applicable Surface Material:Cement/Concrete
Applicable Surface Material:Drywall
Applicable Surface Material:Masonry
Applicable Surface Material:Metal
Applicable Surface Material:Plaster
Applicable Surface Material:Wood
Maximum Coverage Area:155 to 330 sq ft
Cure/Dry-Time Range:15 min (Touch)
Cure/Dry-Time Range:45 min (Handle)
Cure/Dry-Time Range:2 h (Recoat)
Cure/Dry-Time Range:24 h (Light Foot Traffic)
Cure/Dry-Time Range:3 days (Vehicle Traffic)
Cure/Dry-Time Range:7 days (Full Cure)
Age Recommendation:Ages 16 and Up
Product Biodegradability Indicator:N
Product Biodegradability in Days:0
Product Compostability Indicator:N
Compliance Standards:USDA FSIS Regulatory Sanitation Performance Compliant
Compliance Standards:VOC Compliant
Pre-Consumer Recycled Content Percent:0%
Post-Consumer Recycled Content Percent:0%
Total Recycled Content Percent:0%
Disclaimer Statement:For best results, apply within the recommended Application Temperature Range (50 to 90 F) when the surface temperature is also at least 5 F (3 C) above the dew point and the relative humidity is not greater than 85%.
Footnote 1:Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil
Footnote 2:Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil
Reviews
There are no reviews yet.