Talos 1244 Sfd-1000-g Motion Detector

Description

This item is brand-new, factory sealed.

In-MotionDetector for Boats & Watercraft with Mounting Base

If you frequently spend time out on the water on your boat, jet ski, or kayak, then you need to learn about the TALOSdetector for boats and watercraft. Set sail and leave your worries behind knowing the TALOSdetector is on hand tracking when potentially dangerousis in the area.

The TALOSdetector for boats and watercraft alerts users ofstrikes up to 25 miles away from a storm. If your boat or watercraft is the only one in the vicinity whenstrikes, the odds of being struck go way up. Most strikes occur between noon and 6 pm. Keeping the TALOS® detector on board will keep you aware whenis in the area.

Mounting the Device:

Thedetector detects low-level signals fromand must be mounted a minimum of 3 feet away from cell phones, wearables, or any other devices emitting electrical noise. If the detector goes through a sequence of all colors, this indicates that it is detecting electrical noise.

How it Works:

Whenis first detected (up to 25 miles), the detector will flash all 8 LEDs for 5 minutes. To save battery life, after 5 minutes ofdetection, the detector switches to blinking every other LED for the remaining time thatis detected (red, blue, or green depending on the distance of the ).

Features:

• Alerts up to 25-mile range
• The BRIGHTEST visual alerts: 3 colors to indicate the distance of approaching or departing storms
• Green: 25 miles
• Blue: 16 miles
• Red:6 miles
• The LOUDEST audible alerts
• 1 beep for Green: 25 miles
• 2 beeps for Blue: 16 miles
• 3 beeps for Red: 6 miles
• Compact design
• Auto sleep functionality**
• 1-year battery life (*based on average usage)
• Antenna auto tuning – increases efficiency
• The same technology is used in expensive weather stations
• Battery powered: requires 4 AA batteries (lithium recommended)
• **When the unit is first turned on, the unit is in “Normal Mode” and will actively listen for /storm activity. Pressing the ON button a second time puts the unit into auto-sleep mode. In this mode, the detector will sleep until motion is detected, then it will turn on. If no motion is detected for 30 minutes, the unit goes back to sleep.

In the Box:

• TALOSDetection Device
• Mounting Base
• User Guide

Note:It is necessary to replace batteries as soon as thedetector indicates the batteries are almost dead. The detector will beep and flash the LED twice indicating that batteries need to be replaced. This alert is given every 10 seconds. If you are not using thedetector, make sure you remove the batteries prior to storing the detector.