Description
This item is brand-new, factory sealed.
Zinsser Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser PERMA-WHITE Mold & Mildew-Proof paints. To fully cover over and obscure heavy stains, particularly those caused by water leaks, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN and Cover Stain primers are highly recommended. Paint Sub-Category: Primer; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.
Global Product Type:Building/Construction Paints & Primers
Paint Sub-Category:Primer
Paint Sub-Category:Water-Based
Intended Application Environment:Interior/Exterior
Finish/Sheen:Flat
Color(s):White
Color Family:White
Number of Colors:1
Volume Capacity:1 gal
Packaging Type:Bucket/Pail
Binder/Vehicle Ingredient(s):Styrene Acrylic
Diluent/Solvent Ingredient(s):Ethylene Glycol
Diluent/Solvent Ingredient(s):Water
Pigment/Dye/Filler Ingredient(s):Calcium Carbonate
Application Method:Brush
Application Method:Roller
Recommended Level of Ventilation:Moderate
Application Temperature Range:50 to 80 F
Applicable Surface Material:Cement/Concrete
Applicable Surface Material:Drywall
Applicable Surface Material:Glass/Ceramics
Applicable Surface Material:Masonry
Applicable Surface Material:Metal
Applicable Surface Material:Plaster
Applicable Surface Material:Plastic
Applicable Surface Material:Wood
Maximum Coverage Area:400 to 450 sq ft
Cure/Dry-Time Range:30 min (Touch)
Cure/Dry-Time Range:1 h (Handle/Recoat)
Cure/Dry-Time Range:7 days (Full Cure)
Age Recommendation:Ages 16 and Up
Product Biodegradability Indicator:N
Product Biodegradability in Days:0
Product Compostability Indicator:N
Compliance Standards:EPA Reg. No. 87469-1-69587
Pre-Consumer Recycled Content Percent:0%
Post-Consumer Recycled Content Percent:0%
Total Recycled Content Percent:0%
Disclaimer Statement:Do not apply when air or surface temperatures are below 50 F (10 C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
Footnote 1:Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
Footnote 2:Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil
Features
Environmentally Friendly:
Yes
Assembly Required:
No
Country of Origin:
United States
Reviews
There are no reviews yet.